Demedash T-120 Videotape Echo V2 DELUXE

T-120 DELUXE V2 Videotape Echo White

$325.00Price

The T-120 Deluxe , has all the attributes of his litte brother, the V2, with these brand new Features.

 

Tap Tempo Tape Tapestry
Use the new combined 'Tap/Swell' footswitch to tap in a rhythmic interval, and let the tape-worn echo ring back to the beat. 4 selectable tap divisions allow you to choose whether you'd like to use Quarter notes, Dotted Eighths, Eighth notes or Triplets. Just like on the T-120 DLX V1, you can hold down this footswitch in either bypass or during regular operation to activate the swell feature and bask in the chaotic echoes that rise up and self oscillate. You can further induce chaos by twisting the 'Time' knob while swelling to bend the pitch of wall of noise at will.

 

Smooth or Glitchy Use the Glide control to adjust the smoothness or squareness or the LFO, giving you access to random computery bleeps and bloops or taking you into the realm of smoothly varying uncalibrated tape-head mechanisms that cause your pitch to drift.  


Echo Trails or not? Decide later. Select whether echo trails are activated on the fly! While the DLX V1.5 allowed trails selection with an internal DIP switch, the DLX V2 lets you switch them on and off right from the front panel with no fuss.  


3-D for your ears A new stereo-field generation design improves the depth of field by keeping your dry signal completely identical on both left and right channels, and inducing changes only in the wet signal on each respective side.

  • Time

    Sets the duration of time before each recorded note is played back, as well as the duration of time before each subsequent repitition of the note.

    At minimum about 60ms of delay is available. Setting it here allows you to use the primary and secondary LFO controls (Depth, Speed, Glide and Randomize) to create a number of different Chorus and Vibrato textures.

  • Mix

    Sets the balance between the delay signal (Wet) and the unnafected (dry) signal. When fully counterclockwise only the unaffected signal will be audible. As you turn this knob clockwise, the volume of the dry signal will decrease as the volume of the wet signal increases in volume. When fully clockwise only the delayed signal will be audible. 

  • Intensity

    Sets the volume of the wet signal as fed back into the delay input. This increases or decreases the amount and duration of repeats that echo out.

    set high enough, self oscillation can occur. In this case simply turn intensity to zero for a moment to let the regeneration die down.

  • Tape Quality

    Raises or lowers the bandwidth of the delayed signal. 

    At low settings echos degrade further and further with each repeat, reducing fidelity and allowing the playback to float on top of your playing. 

  • Depth

    Varies the amount of pitch-shifting vibrato induced in the recorded signal. More clockwise = more pitch swing. Higher delay times and faster modulation speeds can also lead to wider pitch swing.

  • Bypass/Engage

    Right Footswitch. While the effect is bypassed, press to engage the effect. When engaged press to bypass the effect. When in bypass you can also press and hold this switch (one second or more) to 'momentarily' engage, returning to bypass upon release.

  • Alternate Parameter Access

    Right Footswitch. While the effect is engaged, hold down the 'engage' footswitch. Once the indicator turns yellow, you are in ALT mode.

    Continue to hold the footswitch down and turn the knob of the alternate parameter you wish to adjust. 

    Once you've released the footswitch and the indicator light turns back red, any modifications you've made to the alternate parameters are saved so the next time you turn on your T-120 , they'll still be just the way you set them.

     

     

  • Tap Tempo

    Left Footswitch. Tap the Lefthand footswitch two or three times to enter a tempo. The time between the last two taps is what will be set. The maximum delay time is about 1200ms so if the tap tempo exceeds that then it will be divded in half, giving you a double time echo that remains aligned with the desired rhythm. Divisions are applied beforehand, so as long as your divided tempo is under 1200ms you get what you'd expect.

    Once a tempo is entered, the inicator LED light will blink at the entered rhythm. Tempos can be entered in bypass or engaged modes.

  • Echo Swell

    Right Footswitch. To engage a swell-that is, to momentarily set the repeats of the delay to maximim intensity, hold down the Left footswitch.

    You can do this both while the effect is engaged and while the effect is bypassed if you wish to momentarilyactivate the affect and add a swell to a note.

  • Glide

    Depth's Alternate Parameter. Controls how smooth/Jittery the modulating waveform is. 

    Set fully clockwise the pitch will jump to random values (Random levels if using a fully random wave, a square wave if using a fully periodic wave).

    Set clockwise the pitch will vary smoothly up and down (Random slopes if using a random wave, a triangle wave if using a fully periodic wave). This is the factory setting.

    In between, you will have a waveform that glides quickly to its target value and sits there before gliding to the next one.

  • Randomize

    Speeds Alternate Parameter. Controls the shape of the modulating waveform. Mix between fully periodic (Square/Triangular) and completely randomized (continuously varying levels/slopes).

    This knob offers a continuous spectrum of blending options, so there is a huge variety of shapes to play with.

    Slow, fully random modulation is an especially nice touch when trying to dial in the sound of a mid-90s wedding video, as one often does. Factory setting is 50% randomization.

  • Divisions

    Time's Alternate Parameter. 4 way selector between the various tap delay settings, evenly spaced from fully counterclockwise to fully clockwise. 

    1. Quarter(Q)
    2. Dotted Eighth (DE)
    3. Eighth (E)
    4. Triplet (T)

    When you are in ALternate Parameter Mode, as you turn the Div control, the indicator LED will blink red once each time you update the selection to a  new tap tempo.